Metal Type: Home | Library | Forum | Free Ads | Store

Author Topic: Super caster parts for atelier Villalba  (Read 2267 times)

0 Members and 1 Guest are viewing this topic.

John Cornelisse

  • Moderator
  • *****
  • Posts: 191
  • 31/10/2014
Super caster parts for atelier Villalba
« on: June 03, 2016, 10:12:39 PM »
There are some parts missing, we discovered while cleaning the machine.

Not that much, actually, but when somebody could offer us a hand, we would be thankful for it:

1) The galley clamp 10SG at plate 11 of the book of parts


2) Galley   2SL  at plate 11, woul also be welcome....

Plate 14:


missing here:   SE2 Galley locating block   26SE type carrier guard

plate 24:


Both adaptor bases are missing: b23SLL and c23SLL

plate 44:  The tool to clean the screw inside the big pump  17ST2           

Keri Szafir

  • Old Hand
  • *****
  • Posts: 74
  • Monotype Geek
  • 26/01/2016
    • rpi2caster blog
Re: Super caster parts for atelier Villalba
« Reply #1 on: June 08, 2016, 08:36:23 PM »
I'll look for the SE2 and 26SE; we should have these. I doubt about 10SG (we don't have one on our type-equipped super caster).
"SE2" - do you mean "a5SE"?

As for adapter bases, we have just one b23SLL. I wouldn't part with it unless really needed (e.g. the guy has loose composition matrices, as well as moulds, head and mat holder).

I found a5SE and 26SE, and also 10SG (was on our super caster equipped for leads) and the tap.
"10 most common mistakes made by beginner programmers: missing semicolon, undeclared variable and an off-by-one error."
Technical specialist at Book Art Museum, Lodz, Poland